Source code for testcases.BootTorture
#!/usr/bin/env python3
# OpenPOWER Automated Test Project
#
# Contributors Listed Below - COPYRIGHT 2015,2017
# [+] International Business Machines Corp.
#
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or
# implied. See the License for the specific language governing
# permissions and limitations under the License.
#
'''
BootTorture:
-------------------------------
Torture the machine with repeatedly trying to boot
Sample naming conventions below, see each test method for
the applicable options per method.
--run testcases.BootTorture.BootTorture
^^^^^^^^^^^^^^^^^^^ ^^^^^^^^^^^
module name subclass
--run testcases.BootTorture.BootTorture10
^^^^^^^^^^^^^^^^^^^ ^^^^^^^^^^^^^
module name subclass
'''
import pexpect
import unittest
import difflib
import OpTestConfiguration
from common.OpTestUtil import OpTestUtil
from common.OpTestSystem import OpSystemState
import logging
import OpTestLogger
log = OpTestLogger.optest_logger_glob.get_logger(__name__)
[docs]class BootTorture(unittest.TestCase):
'''
BootTorture x1024
--run testcases.BootTorture.BootTorture
'''
[docs] @classmethod
def setUpClass(cls, boot_iterations=1024):
cls.boot_iterations = boot_iterations
cls.conf = OpTestConfiguration.conf
cls.cv_SYSTEM = cls.conf.system()
cls.file_lspci = cls.get_lspci_file()
@classmethod
def get_lspci_file(cls):
if cls.conf.lspci_file():
with open(cls.conf.lspci_file(), 'r') as f:
file_content = f.read().splitlines()
log.debug("file_content={}".format(file_content))
return file_content
def _diff_my_devices(self,
listA=None,
listA_name=None,
listB=None,
listB_name=None):
'''
Performs unified diff of two lists
'''
unified_output = difflib.unified_diff(
[_f for _f in listA if _f],
[_f for _f in listB if _f],
fromfile=listA_name,
tofile=listB_name,
lineterm="")
unified_list = list(unified_output)
log.debug("unified_list={}".format(unified_list))
return unified_list
def runTest(self):
self.c = self.cv_SYSTEM.console
for i in range(1, self.boot_iterations):
log.debug("Boot iteration %d..." % i)
self.cv_SYSTEM.goto_state(OpSystemState.OFF)
try:
self.cv_SYSTEM.goto_state(OpSystemState.PETITBOOT_SHELL)
except pexpect.EOF:
continue
self.c.run_command_ignore_fail("head /sys/firmware/opal/msglog")
self.c.run_command_ignore_fail("tail /sys/firmware/opal/msglog")
if self.file_lspci:
active_lspci = self.c.run_command("lspci -mm -n")
compare_results = self._diff_my_devices(listA=self.file_lspci,
listA_name=self.conf.lspci_file(),
listB=active_lspci,
listB_name="Live System")
log.debug("compare_results={}".format(compare_results))
if len(compare_results):
self.assertEqual(len(compare_results), 0,
"Stored ({}) and Active PCI devices differ:\n{}"
.format(self.conf.lspci_file(), ('\n'.join(i for i in compare_results))))
self.c.run_command_ignore_fail("dmesg -r|grep '<[4321]>'")
self.c.run_command_ignore_fail(
"grep ',[0-4]\]' /sys/firmware/opal/msglog")
[docs]class BootTorture10(BootTorture, unittest.TestCase):
'''
Just boot 10 times. Just a little bit of peril.
--run testcases.BootTorture.BootTorture10
'''
[docs] @classmethod
def setUpClass(cls):
super(BootTorture10, cls).setUpClass(boot_iterations=10)
[docs]class ReBootTorture(BootTorture, unittest.TestCase):
'''
Soft Reboot Torture - i.e. running 'reboot' from Petitboot shell.
--run testcases.BootTorture.ReBootTorture
'''
[docs] @classmethod
def setUpClass(cls):
super(ReBootTorture, cls).setUpClass(boot_iterations=1024)
def runTest(self):
self.c = self.cv_SYSTEM.console
self.cv_SYSTEM.goto_state(OpSystemState.PETITBOOT_SHELL)
# Disable the fast-reset
self.c.run_command(
"nvram -p ibm,skiboot --update-config fast-reset=0")
for i in range(1, self.boot_iterations):
log.debug("Re-boot iteration %d..." % i)
self.c.run_command_ignore_fail("uname -a")
self.c.run_command_ignore_fail("cat /etc/os-release")
if self.file_lspci:
active_lspci = self.c.run_command("lspci -mm -n")
compare_results = self._diff_my_devices(listA=self.file_lspci,
listA_name=self.conf.lspci_file(),
listB=active_lspci,
listB_name="Live System")
log.debug("compare_results={}".format(compare_results))
if len(compare_results):
self.assertEqual(len(compare_results), 0,
"Stored ({}) and Active PCI devices differ:\n{}"
.format(self.conf.lspci_file(), ('\n'.join(i for i in compare_results))))
self.c.run_command_ignore_fail("dmesg -r|grep '<[4321]>'")
self.c.run_command_ignore_fail(
"grep ',[0-4]\]' /sys/firmware/opal/msglog")
self.c.pty.sendline("echo 10 > /proc/sys/kernel/printk")
self.c.pty.sendline("reboot")
self.cv_SYSTEM.set_state(OpSystemState.IPLing)
try:
self.cv_SYSTEM.goto_state(OpSystemState.PETITBOOT_SHELL)
except pexpect.EOF:
self.cv_SYSTEM.goto_state(OpSystemState.OFF)
self.cv_SYSTEM.goto_state(OpSystemState.PETITBOOT_SHELL)
[docs]class ReBootTorture10(BootTorture, unittest.TestCase):
'''
Reboot Torture, but only 10x.
--run testcases.BootTorture.ReBootTorture10
'''
[docs] @classmethod
def setUpClass(cls):
super(ReBootTorture10, cls).setUpClass(boot_iterations=10)
