.. _skiboot-5.4.6: ============= skiboot-5.4.6 ============= skiboot-5.4.6 was released on Wednesday June 14th, 2017. It replaces :ref:`skiboot-5.4.5` as the current stable release in the 5.4.x series. Over :ref:`skiboot-5.4.5`, we have a small number of bug fixes for FSP based platforms: - FSP/CONSOLE: Workaround for unresponsive ipmi daemon In some corner cases, where FSP is active but not responding to console MBOX message (due to buggy IPMI) and we have heavy console write happening from kernel, then eventually our console buffer becomes full. At this point OPAL starts sending OPAL_BUSY_EVENT to kernel. Kernel will keep on retrying. This is creating kernel soft lockups. In some extreme case when every CPU is trying to write to console, user will not be able to ssh and thinks system is hang. If we reset FSP or restart IPMI daemon on FSP, system recovers and everything becomes normal. This patch adds workaround to above issue by returning OPAL_HARDWARE when cosole is full. Side effect of this patch is, we may endup dropping latest console data. But better to drop console data than system hang. Alternative approach is to drop old data from console buffer, make space for new data. But in normal condition only FSP can update 'next_out' pointer and if we touch that pointer, it may introduce some other race conditions. Hence we decided to just new console write request. - FSP: Set status field in response message for timed out message For timed out FSP messages, we set message status as "fsp_msg_timeout". But most FSP driver users (like surviellance) are ignoring this field. They always look for FSP returned status value in callback function (second byte in word1). So we endup treating timed out message as success response from FSP. Sample output: :: [69902.432509048,7] SURV: Sending the heartbeat command to FSP [70023.226860117,4] FSP: Response from FSP timed out, word0 = d66a00d7, word1 = 0 state: 3 .... [70023.226901445,7] SURV: Received heartbeat acknowledge from FSP [70023.226903251,3] FSP: fsp_trigger_reset() entry Here SURV code thought it got valid response from FSP. But actually we didn't receive response from FSP. - FSP: Improve timeout message Presently we print word0 and word1 in error log. word0 contains sequence number and command class. One has to understand word0 format to identify command class. Lets explicitly print command class, sub command etc. - FSP/RTC: Remove local fsp_in_reset variable Now that we are using fsp_in_rr() to detect FSP reset/reload, fsp_in_reset become redundant. Lets remove this local variable. - FSP/RTC: Fix possible FSP R/R issue in rtc write path fsp_opal_rtc_write() checks FSP status before queueing message to FSP. But if FSP R/R starts before getting response to queued message then we will continue to return OPAL_BUSY_EVENT to host. In some extreme condition host may experience hang. Once FSP is back we will repost message, get response from FSP and return OPAL_SUCCESS to host. This patch caches new values and returns OPAL_SUCCESS if FSP R/R is happening. And once FSP is back we will send cached value to FSP. - hw/fsp/rtc: read/write cached rtc tod on fsp hir. Currently fsp-rtc reads/writes the cached RTC TOD on an fsp reset. Use latest fsp_in_rr() function to properly read the cached rtc value when fsp reset initiated by the hir. Below is the kernel trace when we set hw clock, when hir process starts. :: [ 1727.775824] NMI watchdog: BUG: soft lockup - CPU#57 stuck for 23s! [hwclock:7688] [ 1727.775856] Modules linked in: vmx_crypto ibmpowernv ipmi_powernv uio_pdrv_genirq ipmi_devintf powernv_op_panel uio ipmi_msghandler powernv_rng leds_powernv ip_tables x_tables autofs4 ses enclosure scsi_transport_sas crc32c_vpmsum lpfc ipr tg3 scsi_transport_fc [ 1727.775883] CPU: 57 PID: 7688 Comm: hwclock Not tainted 4.10.0-14-generic #16-Ubuntu [ 1727.775883] task: c000000fdfdc8400 task.stack: c000000fdfef4000 [ 1727.775884] NIP: c00000000090540c LR: c0000000000846f4 CTR: 000000003006dd70 [ 1727.775885] REGS: c000000fdfef79a0 TRAP: 0901 Not tainted (4.10.0-14-generic) [ 1727.775886] MSR: 9000000000009033 [ 1727.775889] CR: 28024442 XER: 20000000 [ 1727.775890] CFAR: c00000000008472c SOFTE: 1 GPR00: 0000000030005128 c000000fdfef7c20 c00000000144c900 fffffffffffffff4 GPR04: 0000000028024442 c00000000090540c 9000000000009033 0000000000000000 GPR08: 0000000000000000 0000000031fc4000 c000000000084710 9000000000001003 GPR12: c0000000000846e8 c00000000fba0100 [ 1727.775897] NIP [c00000000090540c] opal_set_rtc_time+0x4c/0xb0 [ 1727.775899] LR [c0000000000846f4] opal_return+0xc/0x48 [ 1727.775899] Call Trace: [ 1727.775900] [c000000fdfef7c20] [c00000000090540c] opal_set_rtc_time+0x4c/0xb0 (unreliable) [ 1727.775901] [c000000fdfef7c60] [c000000000900828] rtc_set_time+0xb8/0x1b0 [ 1727.775903] [c000000fdfef7ca0] [c000000000902364] rtc_dev_ioctl+0x454/0x630 [ 1727.775904] [c000000fdfef7d40] [c00000000035b1f4] do_vfs_ioctl+0xd4/0x8c0 [ 1727.775906] [c000000fdfef7de0] [c00000000035bab4] SyS_ioctl+0xd4/0xf0 [ 1727.775907] [c000000fdfef7e30] [c00000000000b184] system_call+0x38/0xe0 [ 1727.775908] Instruction dump: [ 1727.775909] f821ffc1 39200000 7c832378 91210028 38a10020 39200000 38810028 f9210020 [ 1727.775911] 4bfffe6d e8810020 80610028 4b77f61d <60000000> 7c7f1b78 3860000a 2fbffff4 This is found when executing the `op-test-framework fspresetReload testcase `_ With this fix ran fsp hir torture testcase in the above test which is working fine. - FSP/CHIPTOD: Return false in error path